Full Description

Filtration rate above 4 gpm/sf is still considered "high rate" by most regulators in theUnited States. The desire to achieve more cost effective filter capacity drives many waterutilities to select a filtration rate of 6 gpm/sf or higher, which is typically implementedthrough up-rating existing filters. Regulatory pressures to provide low turbidity water,and the need to properly handle recycle or discharges of wastewater has placed filteroperations under much more scrutiny than 10 or 20 years ago. The decision of high-ratingexisting filters should also take into consideration more than just effluent turbidityconcentrations or particle counts as is commonly done for high rate approvals. Theoverall operation of the facility should also be considered.This paper reviews some of the key results of water plant high rate studies (in Michigan and North Carolina)for rate increases up to 6 gpm/sf on conventional sand and anthracite dual media filters,with media depths ranging from 24 to 48 inches. The studies showed that during normaloperations, the plants were obvious candidates for higher rate filtration, however, from anoperations standpoint; the plant(s) performed much differently under high productionperiods or problematic source (high algae or manganese) water periods. Filter runs, filterto waste periods, washwater handling volumes and facilities, unit filter run volumes(UFRV), and overall plant reliability was discussed in light of both regulatory limits andPartnership for Safe Water goals of 0.10 ntu. Recommendations for review of operationalfactors outside of simple filter effluent water quality were presented to allow for betterassessment of higher filtration rates, and related facility improvements as part of futureplant upgrades. Includes tables, figures.

Product Details

Edition: Vol. - No. Published: 06/01/2006 Number of Pages: 11File Size: 1 file , 700 KB