ANSI/FCI 70-2-2006

Order this important seat leakage set and save 10% on FCI 70-2-2006 and 70-3-2004

FCI 70-2-2006:
This standard establishes six classes of seat leakage for control valves. Also defined are specific test procedures to determine the appropriate class. Included are classes commonly associated with double-port, double-seat or balanced single-port control valves with a piston ring seal or metal-to-metal seats; commercial unbalanced single-port, single-seat and balanced single-port valves with extra tight piston rings or other sealing means and metal-to-metal seats; valves for critical applications where the control valve may be required to be closed, without a blocking valve, for long period of time; and resilient seating control valveswith O rings or similar gapless seals, among others.

FCI 70-3-2004:
This standard applies to pilot operated and direct acting pressure reducing, pressure relieving (back pressure), differential pressure and temperature regulators.
Selection of a leakage class is not restricted as to regulator design, but acceptable values for various commercially available designs are suggested for each class under Section 4.
The standard cannot be used as a basis for predicting leakage at conditions other than those specified.
This standard is similar to FCI 70-2.
This standard does not apply to pressure regulators as defined in the following standards:
- ANSI Z21.18/CSA 6.3
- ANSI Z21.80/CSA 6.22
- ANSI Z21.78/CSA 6.20



Keywords: 70-2; 70-2; ansi 70-2; FCI 70-2; 70-2; control valve seat leakage; regulator

This product includes:ANSI/FCI 70-3-2004 - Regulator Seat Leakage
ANSI/FCI 70-2-2006 - Control Valve Seat Leakage

People Who Bought This Also Bought:
ANSI/ASME B16.34-2009- Valves Flanged, Threaded and Welding End, Includes Supplement (2010)API Std 598- Valve Inspection and TestingANSI/ASME B16.5-2009- Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch StandardANSI/ASME B31.1-2007- Power Piping, Includes Addenda A (2008) and Addenda B (2009)ANSI/ASME B16.1-2005- Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250ANSI/ASME B16.11-2009- Forged Fittings, Socket-Welding and ThreadedAPI Std 598- Valve Inspection and Testing, Ninth EditionANSI/ASME B16.5-2003- Pipe Flanges and Flanged Fittings: NPS 1/2 through 24MSS SP-61-2009- Pressure Testing of ValvesANSI/ASME B16.34-2004- Valves Flanged, Threaded and Welding End