ANSI/ASSE A10.18-A1264.1 SET

Newly revised: ANSI/ASSE A1264.1-2007 Standard titled: Safety Requirements for Workplace Walking/Working Surfaces and Their Access; Workplace, Floor, Wall and Roof Openings; Stairs and Guardrails Systems. AND, even more exciting - the ANSI/ASSE A10.18-2007 Standard titled: Safety Requirements for Temporary Roof and Floor Holes, Wall Openings, Stairways and Other Unprotected Edges in Construction and Demolition Operations was recently approved as well.

These two standards have historically played a significant role in the prevention of injuries and fatalities resulting in slips, trips, and falls in both general industry and construction and demolition operations. SH professionals have used the A1264.1 standard since the 1960s in the form of the A12.1 and A64.1 standards. During the 1970s, these two standards were consolidated into one document-the A1264.1 standard. This standard(s) has history in excess of forty years and is widely used/recognized in both the private and public sectors. The A10.18 Standard has been in existence since 1983 and is also a well-regarded American National Standard, which is widely used and recognized in the construction and demolitions industry.

The A1264.1 standard was published April 1, 2007 and due to a notice we put out earlier addressing the standard there have been literally hundreds of inquiries. The A10.18 standard was approved as on official standard on March 23, 2007. We believe these standards are important documents for SH professionals and it should be used to address risks and exposures with your worksites.

This product is related to: ANSI/ALI A14.3-2008 - A10.18 and A1264.1 Package
This product includes:ANSI/ASSE A10.18-2007 (R2012) - Construction and Demolition Operations - Safety Requirements for Temporary Floor Holes, Wall Openings, Stairways and Other Unprotected Edges
ANSI/ASSE A1264.1-2007 - Safety Requirements for Workplace Walking/Working Surfaces and Their Access; Workplace Floor, Wall and Roof Openings; Stairs and Guardrails Systems
This product referenced by:API Spec 2C - A10.18 and A1264.1 Package

People Who Bought This Also Bought:
ANSI/ASME B30.2-2005- Overhead and Gantry Cranes - Top Running Bridge, Single or Multiple Girder, Top Running Trolley HoistANSI/NGCMA Z130.1-2004- Golf Cars - Safety and Performance SpecificationsANSI/ASME A17.1-2007- Safety Code for Elevators and Escalators (Bi-national standard with CSA B44-07), Includes Addenda A (2008) and Addenda B (2009)ANSI/ASSE A10.3-2006- Safety Requirements for Powder-Activated Fastening SystemsANSI/NEMA Z535 SERIES- Entire Z535 Safety Series, and Color ChartASSE/AIHA Z9.3-2007- Spray Finishing Operations: Safety Code for Design, Construction, and VentilationANSI/ASSE A10.5-2006- Safety Requirements for Material HoistsANSI/LIA Z136.1-2007 and Z136.6-2005 SET- Safe Use of Lasers (Z136.1-2007) and Safe Use of Lasers Outdoors (Z136.6-2005) SetANSI/ASME A13.1-2007- Scheme for the Identification of Piping SystemsANSI/SIA A92.6-2006- Self-Propelled Elevating Work Platforms