ANSI/BHMA A156.19-2007

1.1 Scope: Requirements in this Standard apply to power assist doors, low energy poweroperated doors or low energy power open doors for pedestrian use, and some small vehicular useand not provided for in ANSI/BHMA A156.10 for Power Operated Pedestrian Doors. Includedare provisions intended to reduce the chance of user injury or entrapment.

1.1.1 This Standard does not attempt to assess any factors that exist with respect to customdesign installations which are not required to meet the requirements of this Standard.

1.2 Required dimensions are expressed in US units first and the SI (metric) equivalents givenin parentheses are approximate. All values which do not carry specific tolerances or are notmarked maximum or minimum shall have the following tolerances: Linear dimensions shall be ?1/16 in (1.6 mm). Pounds or pound force shall be ? 5%. Angular measurements shall be ? 4degrees. Voltage measurements shall be ? 5 %. Temperature measurements shall be ? 4 degreesF (?2 degrees C).

1.3 Definitions of terms used but not found in this Standard are in ANSI/BHMA A156.10 forPower Operated Pedestrian Doors, available at www.buildershardwre.com and the AmericanNational Standards Institute, Inc., 11 West 42nd Street, New York, NY 10036.

1.4 All references to time delay, opening speed and forces, in this standard, refer to the operatorin the power mode as opposed to the manual mode.

This item is available as part of a discounted standards set covering Door Controls .

This product references:ANSI/BHMA A156.10-2005 - Power Operated Pedestrian Doors
ANSI/NEMA Z535.4-2007 - Product Safety Signs and Labels, Includes Errata
This product referenced by:ICC IFC-2006 - Power Assist and Low Energy Power Operated Doors
ICC IBC-2006 - Power Assist and Low Energy Power Operated Doors
This product replaces:ANSI/BHMA A156.19-2002 - Power Assist and Low Energy Power Operated Doors
This product is included inANSI/BHMA A156 Standards Set - Power Assist and Low Energy Power Operated Doors

Browse Product Family:

ANSI/BHMA A156.19-2007
ANSI/BHMA A156.19-2002
ANSI/BHMA A156.19-1997

People Who Bought This Also Bought:
ANSI/BHMA A156.10-2005- Power Operated Pedestrian DoorsANSI/BHMA A156.18-2006- Materials and FinishesANSI/BHMA A156.1-2006- Butts HingesANSI/BHMA A156.31-2007- American National Standard for Electric Strikes and Frame Mounted ActuatorsANSI/BHMA A156.14-2007- Sliding and Folding Door HardwareANSI/BHMA A156.8-2005- Door Controls - Overhead Stops and HoldersANSI/BHMA A156.15-2006- Release Devices - Closer Holder, Electromagnetic and ElectromechanicalANSI/BHMA A156.3-2008- Exit DevicesANSI/BHMA A156.6-2005- Architectural Door TrimANSI/BHMA A156.13-2005- Mortise Locks Latches, Series 1000
View Contents (PDF)