ANSI/BHMA A156.115-W-2006

This Standard was first published by the Door and Hardware Institute in a series of individual A115standards, which are now combined into single documents for steel and wood doors. ANSI approvalwas secured under the Canvass Method. BHMA was accredited on 21 March 1983 by ANSI as asponsor using the Canvass Method.

This Standard covers all significant dimensional attributes for mounting common hardwareproducts in wood doors and metal or wood frames. All dimensions shall be as shown on theaccompanying drawings.

This standard was developed to show only the most commonly used preparations for doorhardware, and provide targets for standardization. Where multiple configurations are in commonusage, separate drawings are provided. For other configurations, it is recognized that these standardsmay be used in part, or with exceptions, while still providing some degree of basic guidance andstandardization.

This product replaces:BHMA A115.W SET - COMPLETE SET - HISTORICAL REFERENCE A115 Wood Door Hardware Standards Hardware Preparation DOCUMENT (A115.1-A115.18)
This product is included inANSI/BHMA A156 Standards Set - Hardware Preparation in Wood Doors with Wood or Steel Frames

Browse Product Family:

ANSI/BHMA A156.115-W-2006
BHMA A115.W SET

People Who Bought This Also Bought:
ANSI/BHMA A156.115-2006- Hardware Preparation in Steel Doors and Steel FramesANSI/BHMA A156.1-2006- Butts HingesANSI/BHMA A156.14-2007- Sliding and Folding Door HardwareANSI/BHMA A156.31-2007- American National Standard for Electric Strikes and Frame Mounted ActuatorsANSI/BHMA A156.13-2005- Mortise Locks Latches, Series 1000ANSI/BHMA A156.19-2007- Power Assist and Low Energy Power Operated DoorsANSI/BHMA A156.26-2006- Continuous HingesANSI/BHMA A156.22-2005- Door Gasketing and Edge Seal SystemsANSI/BHMA A156.12-2005- Interconnected Locks LatchesANSI/BHMA A156.8-2005- Door Controls - Overhead Stops and Holders