ANSI/BHMA A156.115-2006

This Standard was first published by the Door and Hardware Institute in a series of individual A115standards, which are now combined into single documents for steel and wood doors. ANSI approval wassecured under the Canvass Method. BHMA was accredited on 21 March 1983 by ANSI as a sponsor usingthe Canvass Method.

This Standard covers all significant dimensional attributes for mounting commonsteel doors and frames. All dimensions shall be as shown on the accompanying drawings.

This standard was developed to show only the most commonly used preparations forprovide targets for standardization. Where multiple configurations are in common usage,are provided. For other configurations, it is recognized that these standards may be usedexceptions, while still providing some degree of basic guidance and standardization.

This product replaces:BHMA A115 SET - COMPLETE SET - HISTORICAL REFERENCE A115 Specifications for Steel Door and Frame Preparation for Hardware DOCUMENT (A115.1-A115.18)
This product is included inANSI/BHMA A156 Standards Set - Hardware Preparation in Steel Doors and Steel Frames

Browse Product Family:

ANSI/BHMA A156.115-2006
BHMA A115 SET

People Who Bought This Also Bought:
ANSI/BHMA A156.115-W-2006- Hardware Preparation in Wood Doors with Wood or Steel FramesANSI/BHMA A156.31-2007- American National Standard for Electric Strikes and Frame Mounted ActuatorsANSI/BHMA A156.19-2007- Power Assist and Low Energy Power Operated DoorsANSI/BHMA A156.1-2006- Butts HingesANSI/BHMA A156.13-2005- Mortise Locks Latches, Series 1000ANSI/BHMA A156.26-2006- Continuous HingesANSI/BHMA A156.6-2005- Architectural Door TrimANSI/BHMA A156.8-2005- Door Controls - Overhead Stops and HoldersANSI/BHMA A156.18-2006- Materials and FinishesANSI/BHMA A156.14-2007- Sliding and Folding Door Hardware