ANSI/AWWA C950-07

This standard covers the fabrication and testing of nominal 1 in. through 156 in. (25 mm through 4,000 mm) fiberglass pipe and joining systems for use in both aboveground and belowground water systems. Service and distribution piping systems and transmission piping systems are included.

Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced plastic-mortar pipe (RPMP) are fiberglass pipes. Epoxy-resin and polyester-resin systems are covered, and commercial-grade E-type glass is specified as the glass-fiber reinforcement material in the pipe wall. Liner materials incorporated include thermosetting or thermoplastic resin, reinforced or unreinforced, with or without fillers.

The purpose of this standard is to provide the minimum requirements for fiberglass pressure pipe, including design, fabrication, and testing requirements. This standard can be referenced in specifications for purchasing and receiving fiberglass pressure pipe and as a guide for manufacturing this type of fiberglass pressure pipe.

This product referenced by:ANSI/ASME B31.3-2006 - Fiberglass Pressure Pipe
This product replaces:ANSI/AWWA C950-01 - Fiberglass Pressure Pipe

Browse Product Family:

ANSI/AWWA C950-07
ANSI/AWWA C950-01
ANSI/AWWA C950-95

People Who Bought This Also Bought:
AWWA M45- M45: Fiberglass Pipe DesignASTM D3839-08- Standard Guide for Underground Installation of Fiberglass (Glass-FiberReinforced Thermosetting-Resin) PipeAWWA M9- M9: Concrete Pressure PipeANSI/AWWA C300-04- Reinforced Concrete Pressure Pipe, Steel-Cylinder TypeAWWA M11- Steel Water Pipe: A Guide for Design and Installation (M11), Fourth EditionAWWA M55- M55: PE Pipe--Design and InstallationANSI/AWWA C605-05- Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for WaterANSI/AWWA C906-07- Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) Through 63 In. (1,575 mm), for Water Distribution and TransmissionASTM D2412-02- Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate LoadingASTM D2837-08- Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products